HOME   ❯Products   ❯  RT-100
Locator Beacons
Emergency Receivers
RT-100 Emergency Receiver


The RT-100 Emergency Receiver (also marketed under the name “CrewGuard”) monitors the international emergency frequency 121.500 MHz. The receiver triggers an acoustic alarm whenever a signal is received on this frequency. At the same time, a relay activates external alarm devices.

 

In the “selective squelch” mode, an alarm is triggered only if the signal is transmitted by an emergency beacon (ELT, PLB or EPIRB ). This eliminates false alarms caused by radio frequency interference or radio traffic from aircraft that use this frequency as a calling frequency.

Applications:
Maritime

Application

Alert of rescue personnel in the event of distress situations at sea (man overboard) or on land

Automatic activation of rescue or alarm systems

Automatic activation of MOB function of GPS receivers

Monitoring of international emergency frequency

Testing of rescue beacons (PLBs, EPIRBs, ELTs ...)

Recognition of inadvertently triggered ELT beacons at airports to avoid unnecessary and expensive rescue missions

 

Special Features

High reception sensitivity for greater range

Simple operation

Selective squelch to avoid false alarms

Potential-free relay for activation of external devices

Integrated speaker and audio out for external speakers

Robust, waterproof construction

 

Specifications
Dimensions (WxHxD) 85mm x 115mm x 35mm
Weight 350g
Temperatur range -20°C to +60°C
Protective system IP 65
Sensitivity < 0.2µV at antenna input
Receiving frequency 121.500 MHz (channel 1 / distress frequency)
121.650 MHz (channel 2 / test frequency)
Audio exit max. 8 Vpp (speaker > 8 Ohm)
Relay contact 12 V to 30 V DC
Current consumption Standby = 80 mA
max. 400 mA (alarm + external speaker)
Operating voltage 11V to 28V DC (± 10%)
Antenna connector BNC (female) impedance: 50 O
Downloads
Photographs